Sensor Calibration - Paxar 545 User Manual

Sensor Calibration

36 • Printer Operation / Adjustments
-10
11) On the front panel adjust STATION 2 DOT SHIFT to cause station 2's web
print line to be directly over station 1's web print line.
-16
The optical sensors used to detect error conditions in production can be calibrated
without the use of a multi-meter via the front panel. One may need to be calibrated
if it has just been replaced or put into service. Refer to the Front Panel Mode
Descriptions under the Control Panel Operation section.
+10
+16
Users Manual Model 545™