Corrective Action - Paxar 545 User Manual

Problem
Front panel does not complete
diagnostics test 2.
Printer does not receive
batches.
68 • Electrical Trouble Shooting
Probable Cause
1) One or more PC board(s)
unplugged from the Mother
Board.
2) PCMCIA cartridge not inserted
correctly in PCMCIA slot.
1) Serial communications cable
loose or unconnected.
2) Printer not powered on or has
not completed diagnostics tests.
3) Data sent to wrong printer.
4) Configuration incorrect in
PcMate.
5) Batch Que data flow interrupted. 1) Purge all batches in batch Que. power cycle the
6) Faulty Thermal Control Board.
7) Jumpers not configured
correctly.

Corrective Action

1) Power off and remove the power cord from the
AC entry. Remove the back cover and reseat
the offending board.
1) Insert a PCMCIA cartridge with the arrow up
and towards the front of the printer so that the
ejector button pops out.
1) Check and secure both ends of the serial cable
with the thumbscrews.
1) Power printer on and wait until front panel
displays "Ready for batches". Re-download
data.
1) In PcMate change to the printer that the data is
intended to be sent.
1) Reconfigure PcMate for Paxar PCL printer as
per your PcMate manual.
printer and re-download.
1) Replace Thermal Control Board.
1) Contact Paxar Service.
Users Manual Model 545™