Cleaning The Black Mark Sensor; Cleaning The Scanner Window - Paxar TC6032EM Equipment Manual

Cleaning the Pinch and Feed Rollers
To clean the pinch and feed rollers:
1. Turn off the printer and open the supply cover.
2. Remove the supplies. See "Removing Supplies" in Chapter 3 for more
information.
3. Turn the platen roller with your fingers and run a dry, lint-free cloth
across the pinch and feed rollers as they turn. Make sure the rollers are
clean all the way around. If that does not work, use a cloth dampened
slightly with distilled water.
Reload the supplies after the printer dries.
4.

Cleaning the Black Mark Sensor

To clean the black mark sensor:
1. Turn off the printer and open the
supply cover.
Remove the supplies. See "Removing
2.
Supplies" in Chapter 3 for more
information.
3. Clean the black mark sensor with a
dry cotton swab.
Reload the supplies and close the
4.
supply cover.

Cleaning the Scanner Window

Clean the scanner window whenever it appears to be dirty or smeared.
To clean it:
1. Moisten a soft cloth with distilled water. Do not use household cleaners
to clean the printer.
2. Wipe the window until it is completely clean.
5-4 Equipment Manual
Black Mark
Sensor