Paxar 545 User Manual page 53

S T O C K
V A L U E : 0 0 0
P R E S S
L I F E
L A B E L
P R E S S
T O T A L
0 0 0 0 0 0 0 0 0 0
T O T A L
0 0 0 0 0 0 0 0 0 0
Users Manual Model 545™
O U T N O T
N E W
This screen follows the "STOCK OUT BLOCKED" screen. Reposition the fabric so
that a splice is within the sensor site path and when NEW VALUE is at the lowest
value press 'Enter'.
Pressing the MODE / Down Arrow key will take the user back to the "HOLE /
SLOT IN SENSOR" screen. Pressing the EXIT / Up Arrow key will take the user
back to the "HOME" screen
LIFE COUNTS/VERSIONS
E N T E R F O R
C O U N T S / V E R S I O N S
This screen follows the "CALIBRATE SENSORS" screen. Pressing ENTER will
take the user to the "LIFE COUNTS/VERSIONS" screens.
Pressing the MODE / Down Arrow key will take the user to the "FEATURE
SETUP" screen. Pressing the EXIT / Up Arrow key will take the user back to the
"HOME" screen.
C O U N T E R : 0 0 0 0 0 0
E N T E R T O
This screen is the first screen under "LIFE COUNTS / VERSIONS". This screen
shows total labels produced since the last counter reset. Pressing the ENTER key
will reset the counter to zero.
Pressing the MODE / Down Arrow key will take the user to the "TOTAL LABLES
PRODUCED" screen. Pressing the EXIT / Up Arrow key will take the user back to
the "HOME" screen.
L A B E L S
This screen follows the "LABEL COUNTER" screen. This screen displays the total
labels produced since the printer was built. This counter is NOT resettable by the
user.
Pressing the MODE / Down Arrow key will take the user to the "TOTAL INCHES
OF STOCK" screen. Pressing the EXIT / Up Arrow key will take the user back to
the "HOME" screen.
I N C H E S
This screen follows the "TOTAL LABELS PRODUCED" screen. This screen
displays the total inches since the printer was built. This value is NOT resettable by
the user.
Pressing the MODE / Down Arrow key will take the user to the "CONTROLLER
VERSION" screen. Pressing the EXIT / Up Arrow key will take the user back to the
HOME screen.
B L O C K E D
V A L U E : 0 0 0
R E S E T
P R O D U C E D
O F S T O C K
Control Panel Operation • 51