Stacker Full Level Adjustment
Users Manual Model 545™
•
To change the height at which the machine will stop, first loosen the plastic
thumbscrew located on the stacker upright and slide it up or down.
•
Once the desired stop level is reached retighten the thumbscrew.
•
Do not bring the thumbscrew in contact with the top of the slot. The
thumbscrew must be able to move up approximately 3/16" for the switch to be
activated and stop the printer.
•
Note: Not all material and or label sizes will reach the top of the stacker. Set
the stacker full level accordingly.
Printer Operation / Adjustments • 31