Automatic Alarm Repeat; Snooze Function; Sleep Function - Logik L5DAB13E Instruction Manual

Automatic Alarm Repeat

The alarm will automatically repeat at the selected time as long as the alarm icon is displayed.
To cancel this function, press ALARM and turn SNOOZE/SCROLL/SELECT to select Alarm 1
1.
or Alarm 2, then press to confirm.
2. Turn SNOOZE/SCROLL/SELECT to select the options, then press to confirm.
or icon will disappear from the display.
1 2

Snooze Function

When the alarm sounds, press SNOOZE/SCROLL/SELECT to temporarily switch off the
•
alarm. The alarm switch off time will vary according to the selected alarm duration. Press
SNOOZE/SCROLL/SELECT repeatedly to select the alarm switch off time.
Alarm Duration
15 minutes
30 minutes
45 / 60 /90 minutes
• Turn off the alarm by pressing .

Sleep Function

This function allows you to programme the unit to switch to standby mode by itself after a set
sleep time.
1. To activate the sleep function, ensure the unit is ON (not in STANDBY mode) then press
MENU.
Turn SNOOZE/SCROLL/SELECT to select the options, then press to confirm.
2.
When the "Set Sleep Time" shows on the display, turn SNOOZE/SCROLL/SELECT to select
3.
your desired sleep time.
Press SNOOZE/SCROLL/SELECT to confirm. " " will show on the display.
4.
5. When the sleep timer counts down to zero, the unit will switch to standby mode. To turn
the sleep function off while the sleep timer is still counting down, press . " " will disappear
from the display.
Enable Off
5 or 10 minutes
5, 10 or 15 minutes
5, 10, 15 or 30 minutes
Main menu Sleep
15 30 45 60
Save
Alarm Switch Off Time
Sleep Off
GB
13