Alarm; Set Alarm On Or Off; Alarm Setup; Snooze Function - Logik LBDAB14 Instruction Manual

Alarm

Set Alarm On or Off

When the unit is in standby mode, press the ALARM button repeatedly to set the alarm
status of Alarm1 or Alarm2. When the LCD display shows Alarm1 and Alarm2, press the
PREV or NEXT button to choose on or off. Press the ALARM button to confirm. When
Alarm1 is on, the LCD display will show . When Alarm2 is on, the LCD display will show .

Alarm setup

In standby mode, press and hold the ALARM button, and the LCD display will show AL1.
1. Press the PREV or NEXT button to set the hour and then press the ALARM button to
confirm.
2. Press the PREV or NEXT button to set the minute and then press the ALARM button to
confirm.
3. Press PREV or NEXT button to select Buzz, FM or DAB and then press the ALARM
button to confirm.
The display shows AL2 and you can follow step 1 to 3 above to continue its setup.
If the alarm time of AL1 and AL2 are both set the same and both Alarm1 and
Alarm2 is set on, only Alarm2 will be available and LCD display will show .

Snooze Function

When the unit is in standby mode and the alarm rings, press the SNOOZE/SLEEP button to
enter snooze mode. The alarm will ring again after 9 minutes.
When the unit is in snooze mode, press the

Stop the alarm

When the unit is in standby mode and the alarm rings, press the

Sleep function

This function allows you to programme the unit to switch itself to standby mode after a set
sleep time.
When the unit is in on mode, press the SNOOZE/SLEEP button repeatedly to set the sleep
time between Sleep: 10/20/30/40/50/60/70/80/90 minutes. To cancel the sleep time,
press the SNOOZE/SLEEP button repeatedly to set the sleep time to Sleep: 00 minute.
button to switch snooze mode off.
button to stop the alarm.
9