Table of Contents
Advertisement
06
Warnings
Electrical Information
This Portable System is supplied with a mains
lead fitted with a BS1363/A 13 amp plug. If it is
not suitable for your supply sockets it must be
removed and replaced with an appropriate plug.
If the plug becomes damaged and/or needs to
be replaced please follow the wiring instructions
below.
The plug removed must be disposed of
immediately . It must not be plugged into a supply
sock et as this will be an electrical hazard. If the
fuse needs to be replaced it must be of the same
rating and ASTA approved to BS1362. If the plug
is changed, a fuse of the appropriate rating must
be fitted in the plug, adaptor or at the distribution
board. If the fuse in a moulded plug is replaced,
the fuse cover must be refitted before the
appliance can be used.
12
Wiring Instructions
The supply cable will be either 2- core or 3- core.
Follow the appropriate wiring instructions given
below. In both cases ensure that the outer sheath
of the cable is firmly held by the cable clamp.
2-
Core Plug
WARNING! Do not connect either wire to
the earth terminal.
This symbol indicates that this 2-core
appliance is Class II and does not
require an earth connection.
The wire coloured blue must be connected
to the terminal marked with the letter N or
coloured black.
The wire coloured red must be connected
to the terminal marked with the letter L or
coloured red.
BLUE
(Neutral)
Cable clamp
3- Core Plug
WARNING! This appliance must be earthed.
The wire coloured green and yellow must
be connected to the terminal marked with
the letter E, or by the earth symbol
coloured green and yellow.
The wire coloured blue must be connected
to the terminal marked with the letter N or
coloured black.
The wire coloured red must be connected
to the terminal marked with the letter L or
coloured red.
GREEN and
YELLOW
(earth)
BLUE (Neutral)
Cable clamp
Fuse
BROWN
(Live)
, or
Fuse
BROWN (Live)
Advertisement
Table of Contents
