Guarantee - Waeco COOLAIR SP 950 Installation Manual

Guarantee

Fit the fastening frame and the CoolAir SP950 split air conditioner on the
Renault Premium as follows:
➤ Insert and tighten the four M8 x 30 mm bolts, eight U washers  8.4 x 16
and four M8 retaining nuts (fig. 1, page 3) in the mounting frame for the
condenser unit.
➤ Remove the existing nuts (fig. 2 A, page 4).
➤ Screw on the M8 x 20 mm spacer sleeves provided (fig. 2 1, page 4).
➤ Push the fastening frame onto the threaded pins (fig. 2 1 and 2, page 4).
➤ Fasten the fastening frame using the U washers and M8 retaining bolts
provided (fig. 2 2 and 3, page 4).
➤ Place the condenser unit on the projecting bolts of the mounting frame
and bolt to the four U washers  8.4 x 16 and four M8 retaining nuts.
➤ Check that all bolts are still tight after travelling approximately 200 km.
7 Guarantee
The statutory warranty period applies. If the product is defective, please
contact the service partner in your country (addresses on the back on the
instruction manual).
Our experts will be happy to help you and will discuss the warranty process
with you in more detail.
12
CoolAir SP950
EN