Table of Contents
Advertisement
SmartNode 4950-NCE Getting Started Guide
G.SHDSL Daughter Card (if applicable)
Note
For information on configuring the G.SHDSL daughter card,
see Chapter 5,
Factor
DSL
DSL Connection
Management
ATM Support
Interworking/Interoperability • G.SHDSL Interoperability:
G.SHDSL Daughter Card (if applicable)
"G.SHDSL Basic Configuration"
Table 12. G.SHDSL Daughter Card Specifications
• ITU-T G.991.2 (and Amendment 2)
• ITU-T G.991.2, Annex A, B, F, G
• Upgradable to ITU-T G.shdsl.bis—Annex F and G
• G.991.2 2/4 (1/2 pair) operation
• G.994.1 (G.hs) (per G.991.2)
• ITU-T G.991.2 Section E.9
(TPS-TC for ATM transport)
• ITU-T G.991.2 Section E.11
(TPS-TC for PTM transport)
RJ-45
• I.610 OAM F4/F5
• Management interfaces: GUI and Telnet
• Software upgrade: GUI and TFTP
• Classical IPoA (RFC 1577/2225)
• PPPoE Client (over ATM) (RFC 2516)
• IPoA (RFC 2684/1483)
• ATM AAL5 encapsulation
• Max. 8 PVCs
• User selectable VC MUX and LLC MUX (default)
• Configurable auto-connection
• ATM QoS: UBR (default), CBR, and VBR-rt, VBR-nrt,
UBR: per VC queuing
• Auto-configuration: TR-037 & ILMI 4.0
Alcatel
-
NEC
-
Lucent Anymedia
-
Lucent Stinger
-
• BRAS Interoperability:
-
Cisco
Redback
-
B • Specifications
on page 36.
Specs
50
Advertisement
Table of Contents
