Table of Contents
Advertisement
6.4. Video input impedance (DIP) setting switch
Configure the impedance of video input. If selecting 75ohm, impedance will be set as 75ohm. And
if selecting Hi-z, impedance will be set as no limit.
6.5. Video input / output
Within WebEye 2.0 B101, there are video input and output terminal. To view image with CCTV
monitor, input IMPEDANCE should be configured. Because Video input and output of WebEye 2.0
B101 is linked, any one between WebEye 2.0 B101 and CCTV monitor should be configured as
75ohm impedance.
6.6. Setting external device
After connecting device to serial port, set a value according to device.
(1) Run "WebEye 2 Configuration Tool".
(2) Log in WebEye2.0 B01 and click the "Device" tab.
(3) Set the related serial port.
30
Advertisement
Table of Contents
