Table of Contents
Advertisement
5.3.3. When connected to PSTN
When WebEye 2.0 B101 is connected to PSTN line, Dial In/Out function is possible.
When sending event or periodic E-Mail, FTP, Dial Out function runs. When accessing WebEye 2.0 B101
that is connected through PSTN, Dial In function runs.
5.3.3.1. Setting dial out
(1) Select PSTN.
(2) Enter PSTN ISP phone number.
(3) Enter ISP User ID and Password, then press the "Apply" button.
<Note>
1. WebEye 2.0 B101 supports PPP among PSTN types.
2. User's ID and password is supplied from each PSTN ISP.
3. For more information about login script, inquire of PSTN ISP.
4. In orde to use PSTN modem, set the related values of modem.
5. When accessing via Dial In, access ID and Password, which are set in FTP User Accounts, should be
entered.
5.3.4. Setting WRS(Dynamic IP registration)
If WebEye 2.0 B101 is installed on a network of dynamic IP address (floating IP address), administrator
should register the WebEye 2.0 B101 on dynamic IP registration server to give common users simple
connectivity. If not, no one can access the WebEye 2.0 B101 through Web browser. It is because that no
19
Advertisement
Table of Contents
