one knows IP address which one can access the WebEye 2.0 B101 with.
To solve the problem, WebGate runs WRS(Dynamic IP Registration Sever).
(1) Select a registration interval. (1 minute~24 hours)
(2) Enter server address. (default value : 210.116.114.37)
(3) Enter access token.
(4) Use WebEye server name as group ID.
(5) Press the "Apply" button.
<Note>
1. WebEye 2.0 should be set at WRS in following cases.
- When using DHCP in Ethernet
- When using xDSL (except using static IP)
In order to check after registering at WRS, refer to WebEye2 Configuration Tool or "Registered
WebEye list" at WebGate's web site.
<Note>
If checking "Add Public List", WebEye 2.0 is registered at public list and it can be searched.
URL address of registered WebEye list
http://www.webgateinc.com/webeyetable/view-webeye.php
20