Table of Contents
Advertisement
5.4. Setting video
It is to set video input channel.
(1) Select video channel to set.
(2) Check "Enable".
(3) Select video type (NTSC/PAL). (If video type is changed, WebEye should be rebooted.)
(4) When camera is installed reversely, check "Rotation 180'.
(5) Select image quality. (Q0~Q9)
(6) Press the "Apply" button after setting channel.
(7) Possible to move MD and PTZ setting pages with the "Move to MD Setup Page" and "Move to
PTZ Setup Page" buttons.
21
Advertisement
Table of Contents
