Table of Contents
Advertisement
6. Using Input / Output
The electrical diagram of WebEye 2.0 B101 is as below.
<Note> Trimming Wire
When connecting a wire to a terminal block, follow the instructions below. Note the different types of
wire that can be used. (1) is recommended.
(1) Compress the cable with the appointed Blade
terminal. Use insulator against electric shock.
(2) Stranded Wire: Peel off the wiring cover
12~15mm and solder it. Wire gage should be
AWG 28 ~ 18.
(3) Solid Wire: Peel off the wiring cover
12~15mm and solder it. Wire gage should be
AWG 28 ~ 16.
25
Advertisement
Table of Contents
