Table of Contents
Advertisement
6.3.4. Setting sensor input
Set a sensor type.
(1) Run "WebEye 2 CofigStation Tool"
(2) Log in the WebEye 2.0, and click "Event
(3) Possible to set sensor by sensor. When setting as same value, use "Global" menu and click the
"Apply" button.
(4) Press the "Apply" button after setting.
<Note>
NO : Normal Open Type (It means circuit is disconnected at normal case.)
NC : Normal Close Type ((It means circuit is connected at normal case)
Source
Input" menu.
29
Advertisement
Table of Contents
