Contacting Technical Support - HP FlexFabric 12900 series Troubleshooting Manual

...
6 -rw-
1021808 KB total (259072 KB free)
# To display operating statistics on the monitor terminal, enter n at the prompt. The output from this
command varies by software version.
Save or display diagnostic information (Y=save, N=display)? [Y/N] :n
===============================================
===============display clock===============
10:27:16 UTC Mon 11/03/2014
=================================================
===============display version===============
HP Comware Software, Version 7.1.045, Release 1005P12
Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
HP 12900 uptime is 0 weeks, 6 days, 20 hours, 15 minutes
Last reboot reason : USER reboot
Boot image: flash:/12900-CMW710-BOOT-R1005P12.bin
Boot image version: 7.1.045P41, Release 1005P12
Compiled Oct 21 2014 16:39:21
System image: flash:/12900-CMW710-SYSTEM-R1005P12.bin
System image version: 7.1.045, Release 1005P12
Compiled Oct 21 2014 16:39:46
LPU Chassis 1 Slot 1:
Uptime is 0 weeks,6 days,20 hours,12 minutes
HP 12900 LPU with 1 XLP308 Processor
BOARD TYPE:
DRAM:
FLASH:
NVRAM:
PCB 1 Version:
Bootrom Version:
CPLD 1 Version:
CPLD 2 Version:
CPLD 3 Version:
Release Version:
Patch Version
Reboot Cause
......

Contacting technical support

If you cannot resolve a problem after using the troubleshooting procedures in this document, contact HP
Support. When you contact an authorized HP support representative, be prepared to provide the
following information:
898180 Jun 26 2013 09:23:51
LSX1TGS48EA1
2048M bytes
0M bytes
0K bytes
VER.B
106
002
002
002
HP 12900-1005P12
: None
: UserReboot
diag.tar.gz
8