HP FlexFabric 12900 series Troubleshooting Manual page 7

The contents in the log file buffer have been saved to the file
flash:/logfile/logfile.log
<HP> switchback
[Sysname] switchto mdc 3
******************************************************************************
* Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
<HP> logfile save
The contents in the log file buffer have been saved to the file
flash:/logfile/logfile.log
<HP> switchback
2. On the default MDC, identify the log file on each MPU for each MDC:
# Display the log file on the active MPU (in standalone mode) or global active MPU (in IRF mode)
for the default MDC.
<Sysname> dir flash:/logfile/
Directory of flash:/logfile
0 -rw-
1021104 KB total (421552 KB free)
# Display the log file on each standby MPU for the default MDC:
In standalone mode, display the log file on the standby MPU.

<Sysname> dir slot16#flash:/logfile/
Directory of slot16#flash:/logfile
0 -rw-
1021104 KB total (421552 KB free)
In IRF mode, display the log file on each standby MPU.

<Sysname> dir chassis2#slot17#flash:/logfile/
Directory of chassis2#slot17#flash:/logfile
0 -rw-
1021104 KB total (421552 KB free)
NOTE:
If a subordinate chassis has two MPUs, make sure you identify and export the log files on both MPUs.
# Display the log file on each MPU for each non-default MDC.
<Sysname> dir flash:/mdc/
Directory of flash:/mdc
0 drw-
1 drw-
<Sysname> dir flash:/mdc/mdc2/logfile/
Directory of flash:/mdc/mdc2/logfile
0 -rw-
1021104 KB total (421476 KB free)
21863 Jul 11 2013 16:00:37
21863 Jul 11 2013 16:00:37
21863 Jul 11 2013 16:00:37
- Jul 10 2013 14:56:50
- Jul 10 2013 16:48:04
465 Jul 11 2013 16:08:51
3
logfile.log
logfile.log
logfile.log
mdc2
mdc3
logfile.log
*
*
*