HP FlexFabric 12900 series Troubleshooting Manual page 71

ID Name
----------------------------------------------------------------
1 Admin
Chassis 3 Slot 5:
Used 16.9MB, Free 663.8MB, Total 680.7MB:
ID Name
----------------------------------------------------------------
1 Admin
Chassis 3 Slot 9:
Used 16.9MB, Free 663.9MB, Total 680.8MB:
ID Name
----------------------------------------------------------------
1 Admin
CPU:
Chassis 3 Slot 0:
ID Name
-------------------------------------------------
1 Admin
2 mdcA
Chassis 3 Slot 3:
ID Name
-------------------------------------------------
1 Admin
Chassis 3 Slot 4:
ID Name
-------------------------------------------------
1 Admin
Chassis 3 Slot 5:
ID Name
-------------------------------------------------
1 Admin
Chassis 3 Slot 9:
ID Name
-------------------------------------------------
1 Admin
Disk:
Chassis 3 Slot 0:
flash:: Used 108.8MB, Free 383.2MB, Total 492.0MB:
ID Name
--------------------------------------------------------------
1 Admin
2 mdcA
If the resources assigned to an MDC are insufficient, re-assign resources to the MDC.
2. Display which MDC is authorized to use the LPU. In this example, the LPU is installed in slot 3 on
member device 3.
If the output is as follows, the undo location command has not been executed for any LPU on the
default MDC, and all LPUs belong to the default MDC:
[Sysname]mdc Admin
Quota(MB) Used(MB)
680.7 16.9
Quota(MB) Used(MB)
680.7 16.9
Quota(MB) Used(MB)
680.8 16.9
Weight Usage(%)
10 0
10 0
Weight Usage(%)
10 3
Weight Usage(%)
10 3
Weight Usage(%)
10 6
Weight Usage(%)
10 5
Quota(MB) Used(MB)
492.0 108.8
492.0 0.0
67
Available(MB)
663.8
Available(MB)
663.8
Available(MB)
663.9
Available(MB)
383.2
383.2