Display Features - Fluke MultiFiber Pro User Manual

MultiFiber Pro Optical Power Meter and Fiber Test Kits
Users Manual

Display Features

Figure 3. Meter Display Features
8
A
Modes for the meter and settings for tests.
To select the POWER, SET REF, or LOSS measurement
modes, press
or to view records, hold down
use and
• POWER: Use this mode to measure optical power. See
"How to Measure Optical Power" on page 15.
• SET REF: Use this mode to set the reference for loss
measurements. See "Set the Reference for Loss
Measurements" on page 19.
• LOSS: Use this mode to measure loss. See "How to
Measure Loss" on page 18.
• LOSS LIMIT: Select this to set the limit for loss
measurements. See "Set the Limit for Loss
Measurements" on page 18.
• VIEW RECORD: Use this mode to see and delete saved
results. See "View Records" on page 27.
B
: There is a problem with a measurement, or you
tried to save a measurement, but the memory is full.
OK: All measurements are satisfactory, or the meter
GEU03.EPS
saved the results.
. To change settings for measurements
for 2.5 seconds, then
to make selections.