Mitsubishi FX3G Series Programming Manual page 220

Programmable controllers

Hide thumbs Also See for FX3G Series:

Table of Contents

Programming Manual - Basic & Applied Instruction Edition

Program example

1. When a jump is necessary after OFF processing

In one operation cycle after X023 changes from OFF to ON, the CJ P7 instruction becomes valid.

By using this method, jump can be executed after all outputs between the CJ P7 instruction and the label P7 turn OFF.

User program

8 Program Flow – FNC 00 to FNC 09

8.1 FNC 00 – CJ / Conditional Jump

Fx3u series Fx3gc series Fx3uc series