Table of Contents
Advertisement
User Manual of Digital Video Recorder
12.2.2 Manually Rebuilding Array
Purpose:
If there is no hot spare disk available, you can rebuild the array manually to restore the array when the virtual disk
is in Degraded status.
Steps:
1.
Enter the Array Settings interface. The status of the array is displayed as Disk Loss, and the status of the
virtual disk is displayed as Degraded.
Menu > HDD > RAID > Array;
Menu > HDD > RAID > Virtual Disk
2.
Click the icon
on the Array Settings interface to rebuild the array.
At least one available physical disk should exist for rebuilding the array.
3.
Select the available free physical disk and click OK to confirm to rebuild the array.
The "Do not unplug the physical disk when it is under rebuilding" message box pops up. Click OK to start
4.
rebuilding.
5.
After rebuilding successfully, the array and virtual disk will restore to Functional. You can enter the Array
Settings interface and Virtual Disk interface to view the rebuilding status.
Figure 12. 17 Array Settings Interface
Figure 12. 18 Virtual Disk Interface
Figure 12. 19 Rebuild Array Interface
196
Advertisement
Table of Contents
