Table of Contents
Advertisement
User Manual of Digital Video Recorder
Steps:
1. Click the button
or press the PTZ button on the front panel;
or click the PTZ Control icon
or click PTZ Control on the right-click menu to open the PTZ control panel in live view mode.
2. Select the PTZ camera from the drop-down list for control.
3. Click the icon
on the panel and then click the One-touch tab to enter the One-touch control interface.
4. There are 3 one-touch park types selectable, click the corresponding button to activate the park action.
Park (Quick Patrol): The PTZ camera starts the quick patrol (from preset 1 to preset 32 in order)
automatically after the park time. The undefined preset will be skipped.
Park (Patrol 1): The PTZ camera moves according to the path of predefined patrol 1 after the park time.
Park (Preset 1): The PTZ camera moves to the location of predefined preset 1 after the park time.
5. Click the button again to inactivate the corresponding park action.
The park time can only be set through the local menu of PTZ camera and the default value is 5s.
4.3 PTZ Control Panel
To enter the PTZ control Panel, there are 2 ways supported:
Option1:
In the PTZ settings interface, click the PTZ button on the lower-right corner.
Option2:
In the Live View mode, you can press the PTZ Control button on the front panel or on the remote control, or click
the PTZ Control icon
PTZ control panel.
Click the Configuration button on the panel, and you can enter the PTZ Settings interface.
In PTZ control mode, the PTZ panel will be displayed when a mouse is connected with the device. If no mouse is
in the lower-right corner of the PTZ setting interface;
in the quick setting toolbar during the live view process;
Figure 4. 9 Control Panel-Call Linear Scan
in the quick setting toolbar, or click PTZ Control on the right-click menu to enter the
68
Advertisement
Table of Contents
