Appendix B - Cable Recommendations; Appendix C - Factory Replacement Parts - Patton electronics 1004ABRC User Manual

APPENDIX B
PATTON ELECTRONICS MODEL 1004ABRC
CABLE RECOMMENDATIONS
The Patton Model 1004ABRC operates at frequencies of 115kHz or
less and has been performance tested by Patton technicians using
twisted-pair cable with the following characteristics:
Wire Gauge Capacitance
19 AWG 83nf/mi or 15.72 pf/ft.
22 AWG 83nf/mi or 15.72 pf/ft.
24 AWG 83nf/mi or 15.72 pf/ft.
To gain optimum performance from the Model 1004ABRC, please
keep the following guidelines in mind:
• Always use twisted pair wire—this is not an option.
• Use twisted pair wire with a capacitance of 20pf/ft or less.
• Avoid twisted pair wire thinner than 26 AWG (i.e. avoid higher
AWG numbers than 26)
• Use of twisted pair with a resistance greater than the above speci-
fications may cause a reduction in maximum distance obtainable.
Functionality should not be affected.
• Many environmental factors can affect the maximum distances
obtainable at a particular site. Use the above data rate/distance
table as a general guideline only.
Resistance
.0163 Ohms/ft.
.0326 Ohms/ft.
.05165 Ohms/ft.
21
APPENDIX C
PATTON ELECTRONICS MODEL 1004ABRC
FACTORY REPLACEMENT PARTS
The Patton Model 1004ABRC rack system features interchangeable
rear half cards, power cords/fuses for international various operating
environments and other user-replaceable parts. Model numbers and
descriptions for these parts are listed below:
Patton Model #
1000RPEM..........................120/240V Rear Power Entry Module
1000RPSM-2.......................120/240V Front Power Supply Module
1000RPEM-DC ...................DC Rear Power Entry Module
1000RPSM-48A ..................48V Front Power Supply Module
1000RPEM-V ......................120/240V CE Compliant Rear Power
Entry Module
1000RPEM-V ......................120/240V CE Compliant Rear Power
Supply Entry Module
0805US ...............................American Power Cord
0805EUR.............................European Power Cord CEE 7
0805UK ...............................United Kingdom Power Cord
0805AUS .............................Australia/New Zealand Power Cord
0805DEN.............................Denmark Power Cord
0805FR ...............................France/Belgium Power Cord
0805IN.................................India Power Cord
0805IS.................................Israel Power Cord
0805JAP..............................Japan Power Cord
0805SW ..............................Switzerland Power Cord
0516FPB1 ...........................Single Width Blank Front Panel
0516FPB4 ...........................4-Wide Blank Front Panel
0516RPB1...........................Single Width Blank Rear Panel
0516RPB4...........................4-Wide Blank Rear Panel
Description
22