Steering Dual Rates (D/R); Servo Reversing - FUTABA 2HR Instruction Manual

Use this function to adjust the steering travel
of your model. If the model understeers
(push) while cornering, add steering by
turning C,W of the D/R button. When the
model oversteers (loose), take away steering
by turning C,C,W of the D/R button.
WARNING
Be sure that the steering linkage does
not bind or come in contact with any
suspension parts or arms. If unreasonable
force is applied to the servo, the servo may
be damaged and result in loss of control.
This function reverses the rotation direction
of the servo.
When the trim position deviates from
the center, the deviation will be on the
opposite side when the servo is reversed.
It operated a steering to the left,
but a car turned right.
24
2HR Functions
Steering Dual Rates

Servo Reversing

Change the direction of the steering
reversing switch.
Steering Dual
Rates
CAUTION
Adjust the Steering Trim after adjusting
the Steering Dual Rate Dial.
Throttle Servo
Reversing
NOR: Normal
REV: Reverse
Steering Servo
Reversing
NOR: Normal
REV: Reverse
Steering Servo
Reversing
NOR: Normal
REV: Reverse