Steering Dual Rates (D/R-Ch1); Model Selection/Model Reset (Mdl); Steering Servo Reversing (Rev-Ch1); Throttle Servo Reversing (Rev-Ch2) - FUTABA 2PL Instruction Manual

Steering Dual Rates (D/R-CH1)

Use this function to adjust the steering travel of your model.
If the model understeers (push) while cornering, add steering
by pressing the upper side of the D/R button. When the
model oversteers (loose), take away steering by pressing the
lower side of the D/R button.

Model Selection/Model Reset (MDL)

The model selection selects the desired model memory from the 10 model memories
stored within the transmitter and the model reset erases all data stored in a specific model
memory.
Model Selection

Steering Servo Reversing (REV-CH1)

This function reverses the rotation direction of
the Steering servo.
When the trim position deviates from
the center, the deviation will be on the
opposite side when the servo is re-
versed.

Throttle Servo Reversing (REV-CH2)

This function reverses the rotation direction of
the throttle servo.
When the trim position deviates from
the center, the deviation will be on the
opposite side when the servo is re-
versed.
Model number
1 - 0
(Selection key)
Model name
Model Reset
Push the DT2 lever up or down
for about one second.
All data stored in the current
selected model memory is
erased.
Steering Servo Reverse
NOR: Normal
REV: Reverse
Throttle Servo Reverse
NOR: Normal
REV: Reverse
Steering D/R
30 - 100%
(Selection key)
(Selection key)
13