Flashforge Creator Pro User Manual page 15

The following gives an introduction on how to import files (.STL) into the Replicator G software
and then generate Gcode to print your creation.
Click File > Open, then browse and select the file (.STL) that you would like to print. Import the
file by double-clicking on it. Then the drawing will appear on the Replicator G interface.
When the object is imported you may find that it is not on the virtual build platform or even on the
screen, using the function keys indicated by the blue boxes in the illustration above, you can change
the camera angle and click [Move]--[Center] to re-position the object onto the center of the build
platform. Once you've done this, the next step is to generate the Gcode. This is achieved by clicking
14