Flashforge Creator Pro User Manual page 33

After the Gcode is generated, the temperature of the bottom plate needs to be changed if you print
PLA filament. See below for the required modification. First, select Gcode as shown highlighted in
the illustration below and change M109 S110 to M109 S50 to set the HBP temperature at 50°C.
Then click File > Save to save this modification. If you print ABS filament, then no HBP
temperature modification is needed.
If you have connected Replicator G Creator Pro printer, click the left most button on the green bar
near the top of the screen. The Gcode has now been sent to the printer and the object will start
printing shortly. If not, please refer to USB Connection & Temperature Setting to connect.
32