Displaying The Number Of Waiting Calls/Overload Display; Using Another Telephone Like Your Own For A Call - Siemens HiPath 2000 User Manual

Step by step
PIN and Authorization
*508=Temporary Phone?
Change PIN?
Displaying the number of waiting calls/
overload display
You can show the number of external waiting calls on
the display if you programmed the "View number of
calls" key
R
Press the " Calls in Q" key.
If the number of waiting calls exceeds a preset limit
while you are engaged in another call (overload), the
LED on the key lights up. Contact your service person-
nel to find out the waiting call limit.
• LED off:
There are no waiting calls.
• LED is flashing slowly:
The set limit has been reached.
• LED is flashing quickly:
The limit has been exceeded (overload).
Using another telephone like your own
for a call
Other parties can temporarily use your phone like their
own for an outgoing call.
N
Press the key shown.
f
Select and confirm the option shown.
Select and confirm the option shown
j
Enter the number of the other user.
j
Enter the other user's lock code
if nec.
If the other user has not set a PIN, he or she is prompt-
ed to do so on his or her phone.
j
Dial the external number.
This state is canceled as soon as the call is ended.
[1] "Differing display view in a HiPath 4000 environment"
page 65.
More functions/services
[1]
.
page 82.
87