Pnp/Pci Configuration Setup - Contec IPC-BX/M360C User Manual

PnP/PCI Configuration Setup

PNP OS Installed
Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
↓→←:Move
Enter:Select
F5: Previous Values
Figure 4.16. PnP/PCI Configuration Setup Window (factory setting)
Description
PNP OS Installed
The default is "No"; you usually do not have to
change this setting.
Reset Configuration Data
The default is "Disabled"; you usually do not have
to change this setting.
After upgrading the BIOS, start it up with
"Enabled" selected, then select "Disabled" again.
Resource Controlled by
The default is "Auto(ESCD)"; you usually do not
have to change this setting.
User's Manual
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configuration Setup
No
[Disabled]
[Auto(ESCD)]
Press Enter
[Disabled]
+/-/PU/PD:Values
F6: Fail-Safe Defaults
No
Yes
Disabled
Enabled
Auto(ESCD)
Manual
Item Help
Menu Level
Select Yes if you are
using a Plug and Play
capable operating
system Select No if
you need the BIOS to
configure non-boot
devices
F10:Save Esc:Exit F1 General Help
F7: 0 timized Defaults
Choice
4. BIOS Setup
45