Maktec MT814 Instruction Manual
Hide thumbs
Also See for MT814:
- Instruction manual (44 pages) ,
- Technical information (8 pages) ,
- Instruction manual (36 pages)
Related Manuals for Maktec MT814
Summary of Contents for Maktec MT814
- Page 1 INSTRUCTION MANUAL Hammer Drill MT814 MT815 011088 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model MT814 MT815 Concrete 16 mm Capacities Wood 30 mm Steel 13 mm No load speed (min 0 - 3,200 Blows per minute 0 - 48,000 Overall length 296 mm 295 mm Net weight 2.1 kg 2.0 kg... -
Page 3: Hammer Drill Safety Warnings
Do not abuse the cord. Never use the cord for power tool will do the job better and safer at the carrying, pulling or unplugging the power tool. rate for which it was designed. Keep cord away from heat, oil, sharp edges or 19. - Page 4 For Model MT814 Always be sure you have a firm footing. Be sure no one is below when using the tool in 1. Drill chuck high locations. 2. Chuck key Hold the tool firmly with both hands.
-
Page 5: Functional Description
NOTE: Selecting the action mode The depth gauge cannot be used at the position where the depth gauge strikes against the gear housing. 1. Action mode changing lever FUNCTIONAL DESCRIPTION Switch action CAUTION: Before plugging in the tool, always check to see •... -
Page 6: Maintenance
CAUTION: Pressing excessively on the tool will not speed up • the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool. There is a tremendous force exerted on the tool/bit •... - Page 8 Makita Corporation 884963-6...