Topcom IP100 User Manual page 33

• DHCP
path: <config-dhcp>#
add DHCP rule
gateway x.x.x.x -dnsserver x.x.x.x _time xxx
Example:<config-dhcp>#entry -name lan2004 -startip 192.168.1.2 -endip 192.168.1.254 -
netmask 255.255.255.0 -gateway 192.168.1.1 -dnsserver 192.168.10.18
delete DHCP rule
Example: <config-dhcp>#no entry -name lan2004
Show DHCP settings
[disable]enable DNS-relay
• Dialrule
path: <config-dialrule>#
[disable] enable End with #
Set end with fix length
Disable end with fix length
Set timeout to send
Disable timeout to send
Add digital map
Example: <config-dialrule>#entry -prefix 010 -length 11
Delete digital map rule
Example: <config-dialrule>#no entry -prefix 010
Show current digital map
• LAN interface settings
path: <config-interface-fastethernet-lan>#
[disable]enable bridge mode ---[no]bridgemode
[disable]enable DHCP service
[disable]enable NAT
Show current DHCP rules
Show LAN port IP address
Show NAT info
Change LAN port IP address
Example:<config-interface-fastethernet-lan>#ip -addr 192.168.1.10 -mask 255.255.255.0
• WAN interface settings
path: <config-interface-fastethernet-wan>#
[disable]enable dhcp client
[disable]enable pppoe
[disable]enable QOS
Set default gateway IP
Clear default gateway IP
Set WAN port IP address
Example:<config-interface-fastethernet-wan>#ip -addr 202.112.241.100 -mask
255.255.255.0
Topcom IP100
---entry -name xxx -startip x.x.x.x -endip x.x.x.x -netmask x.x.x.x -
---no entry -name xxx
---show
---[no]dns-relay
---[no]endchar
---fixlen xxx
---no fixlen
---timeout-send xxx
---no timeout-send
---entry -prefix xxx -length xxx
---no entry -prefix xxx
---show
---[no]dhcp-server
---[no]nat
---dhcpshow
---ipshow
---natshow
---ip -addr x.x.x.x -mask x.x.x.x
---[no]dhcp
---[no]pppoe
---[no]qos
---gateway x.x.x.x
---no gateway
---ip -address x.x.x.x -mask x.x.x.x
Topcom IP100
31