Topcom IP100 User Manual page 14

Topcom IP100
User Agent:
Encrypt Key: The particular service system decrypts of the key , matching with the server
Type usage, the key provide by the particular service system supplier, default
is empty.
Server Type: The particular service system supplier carries out the sign and speeches to
encrypt, default is common
DTMF Mode: DTMF signal sending mode: support RFC2833, DTMF_RELAY (inband audio)
and SIP info
RFC Protocol Edition:Current IP100 SIP version. Set to RFC 2543 if the gate need to
Enable Register: Enable/Disable SIP register. IP100 won't sent register info to SIP server if
6.4.2 Iax2 Config
Setting page of public IAX server:
IAX Server Addr:Register address of public IAX server
IAX Server Port: Register port of public IAX server£¨default port is 4569
Account Name: Username of your SIP account (Always the same as the phone number)
Account Password:Password of your IAX account.
Local port:
Phone Number:
Voice mail number: If the IAX support voice mail, but your username of the voice mail is
Voice mail text: if IAX support voice mail, config the domain name of your mail box here.
Echo test number: If the platform support echo test , and the number is test form , the config
12
communicate to devices (such as CISCO5300) using the SIP 1.0.
Default is RFC 3261.
disable register.
Signal port of local, default port is 4569
Phone number of your IAX account
letters which you can not input with the ATA , then you use the number
to stand for your username.
the test number to replace the text format The echo test is to test the
woring status of terminals and platform.
Topcom IP100