Care And Maintenance - CDA CI260 Manual For Installation, Use And Maintenance

Care and maintenance

Before beginning any care or maintenance, you should always
disconnect the appliance from the electricity supply, and also turn
off the water supply.
If a programme has been run recently, wait for the water in the
appliance to cool down to prevent risk of scalding.
Water inlet filters
There are filters on the tap side of the
water inlet hose and at the ends of the
water inlet valves. These filters prevent
ingress of dirt or foreign objects into
the machine through the water supply.
These filters should be cleaned
approximately once a year to ensure
there is no interruption in the water
supply to the machine.
• Remove the water inlet hose.
• Remove the filters on the water inlet
valves using pliers.
• Remove the filters on the tap side of
the water inlet hose manually, as well
as the seal.
• Clean the filters thoroughly using a
brush.
• Replace the filters carefully, in the
same way as they were removed.
22
fig. 3