CDA CI260 Manual For Installation, Use And Maintenance page 15

A programme without final spin is used to prevent creasing when
washing special fabrics.
Extra functions
Extra functions can be selected once the programme has been set.
To select any extra function, press the required extra function button.
The programme table on page 19 shows the functions available for
each programme. If the function is available, the extra function button
indicator will illuminate. If it is not available, the indicator will flash
before switching off. The programme time shown on the display will
reduce or increase, according to the extra functions selected.
Prewash
This function adds a prewash to every programme. When this
function is selected, detergent must be added to the prewash section
of the detergent dispenser.
Rinse hold
This function pauses the programme before the final rinse water is
set to drain. This holds the clothes in water to prevent creasing. The
indicator will flash when the rinse hold function is in progress. To start
the final spin cycle, press the rinse hold button. The indicator will
switch off and the final spin programme will start.
Extra rinse
This function adds another rinse cycle to the programme, which is
ideal for large loads and garments belonging to people with sensitive
skin. Please note: this function will increase the water consumption.
15