Table of Contents
Advertisement
Pump filter
The pump filter system prevents ingress of lint or foreign objects into
the drain pump, reducing the risk of damage.
The pump filter should be cleaned regularly, every two to three
months at least.
To clean the filter:
•
Open the kickplate cover by pulling down on the groove at the top
of the cover.
•
Place a container under the filter cover to collect the flow of the
remaining water from the machine.
•
Loosen the filter cover by turning it slowly anti-clockwise until the
remaining water has drained away.
•
When all the water has drained out of the machine, turn the filter
cover several times until the filter can be completely removed.
•
Remove any objects caught in the filter and the drain pump.
•
Refit the filter by turning it clockwise.
•
Replace the kickplate cover.
Please note - failure to replace the filter cover properly will cause
water to leak from the machine.
To avoid injury, do not carry out this operation when the wash
water is at a temperature over 30ºC
fig. 4
23
Advertisement
Table of Contents
