Table of Contents
Advertisement
The working ground of the routers should be properly separated and kept as far as possible from the grounding
device of the power equipment or the anti-lightning grounding device.
Keep the equipment away from high-power radio transmitter, radar transmitting station, and high-frequency
large-current device.
Measures must be taken to isolate static electricity.
Precaution for Fiber Connection
Before connecting the fibers, you should ensure that the type of optical connector and the type of fibers match the type of
the optical interface used. Moreover, you should pay attention to the Tx and Rx directions of the fiber. The Tx end of this
equipment should be connected to the Rx end of the peer equipment, and the Rx end of this equipment to the Tx end of
the peer equipment.
Installation Tool Requirements
Common tools
Special-purpose Tools
Meter
RG-S8614/S8610/S8606/S8606 B series is not shipped with a tool kit. You need to prepare a tool kit by yourself.
Unpacking Requirements
Goods Checklist
All panels have been properly installed and commissioned.
Chassis Packing
Screws
Box
Documentation
Packing list
A correct AC or DC power module is delivered.
Cable management bracket (only for the RG-S8610)
Air filter (for the RG-S8614/S8610/S8606 B only)
Handles
Accessory Box
Fan tray
Power cords (for AC power supply only)
Screws
Documentation
Packing list
Module Packing
Modules, packing list and documentation.
Box
A normal delivery should contain the above mentioned items, which may differ from the actual delivery, depending on
purchase contracts. Please check your goods carefully against the packing list or purchase contract. If you have any
questions or there are any errors, please contact your distributor.
Phillips screwdriver, flat screwdriver, related electric and optical cables
Bolts, diagonal pliers, straps
Anti-static tool
Multimeter
Advertisement
Table of Contents
