Operation; Instructing The User/Owner - Rotex HPSU compact 304 Installation And Maintenance Manual

2 x Safety

2.5.7 Operation

The ROTEX HPSU compact:
Do not operate until all installation and connection work is
completed.
Only operate with a completely full storage tank (Level
indicator) and heating circuit.
Operate at a maximum pressure of 3 bar.
Only connect with a pressure reducer on the external water
supply (supply line).
Only operate the with the specified quantity of coolant and the
type of coolant specified.
Only operate if the protective cover is installed.
The specified servicing intervals should be adhered to and in-
spection work must be carried out.

2.5.8 Instructing the user/owner

Before you hand over the ROTEX HPSU compact, explain to
the user/owner how to operate and check the system.
Hand over the technical documentation (this document and
all supporting documents) to the user and advise him that
these documents must be made available at all times and be
stored in the immediate vicinity of the unit.
Make a record of the handover by filling out and signing the
installation and instruction forms jointly with the user/owner.
8
FA ROTEX HPSU compact 4 - 06/2015