Alarm Tone; Timer Setup; Start Timer; Stop Timer (With The Timer Running) - Humminbird HELIX 5 SI GPS Operation Manual

Alarm Tone selects the pitch of the alarm sound. A brief tone will be produced as you adjust the
Alarm Tone so that you can select the tone that you can hear best.
Timer Setup allows you to open a dialog box to create settings for the Timer. You can also start
the countdown from this dialog box. When the Timer is started, the clock counts down from the
amount of time set in the dialog box.
• Time: Use the 4-WAY Cursor Control key to set the hours, minutes, and seconds.
• Save and Start: To start the Timer immediately, select Save and Start, and press the RIGHT
Cursor key.
• Save and Close: To save your settings and start the Timer at a later time, select Save and
Close, and press the RIGHT Cursor key. Also, see Start Timer.
• Digital Readout: To display the Timer on-screen as it counts down, see Views: To Change
the Digital Readouts.
Start Timer allows you to start the Timer using the saved countdown settings in the Timer Setup
dialog box. To create the Timer settings, see Timer Setup.
Stop Timer allows you to stop the Timer while it is counting down.
Alarms Menu Tab

Alarm Tone

Settings: High, Medium, Low; Default = Medium

Timer Setup

Settings: Press the RIGHT Cursor key to open the dialog box.

Start Timer

Settings: Press the RIGHT Cursor key to start the Timer.
Stop Timer
(with the Timer running)
Settings: Press the RIGHT Cursor key to stop the Timer.
122