Si Range Lines (Advanced, Side Imaging View Only); Si Readouts (Side Imaging View Only) - Humminbird HELIX 5 SI GPS Operation Manual

SI Range Lines divide each side beam range into four equal sections on the display. SI Range
Lines can be used to interpret the location of objects on the display. You can turn SI Range Lines
On (visible) or Off (hidden).
NOTE: The range numbers are estimated and should not be used for measurement.
NOTE: If both SI Range Lines and Contour Mode are turned on, the SI Range Lines will remain on the display,
but the individual range numbers are not available (see Side Imaging X-Press Menu: SI Enhance).
SI Range Lines (with Contour Mode Off)
1
range numbers
2
SI range lines
NOTE: The illustrations in this manual may not look exactly like the display on your Humminbird model, but
the view will work in a similar way.
SI Readouts allows you to display or hide the digital readout boxes in the Side Imaging View.
When SI Readouts is set to Off, Temperature and Depth will continue to be displayed on the screen.
NOTE: See Setup Menu Tab: Select Readouts for more information.
SI Readouts On
Sonar Menu Tab
SI Range Lines
(Advanced, Side Imaging View only)
Settings: Off, On; Default = Off
1
SI Readouts
(Side Imaging View only)
Settings: Off, On; Default = On
SI Range Lines (with Contour Mode On)
2
1
SI range lines
128
SI Readouts Off
1