Auto Range (Advanced); Vessel Offset (Advanced); Offset Speed (With Vessel Offset Turned On); Contour Lines (Optional-Purchase Lakemaster Charts Only) - Humminbird HELIX 5 SI GPS Operation Manual

Auto Range, when turned on, sets the chart scale to the lowest range so that only the boat icon
and the next waypoint in the route are displayed. See Views: Viewing Cartography for more
information.
Zoom In/Out: Press the +/– ZOOM keys. Using the +/– ZOOM keys will override Auto Range. To
resume using Auto Range, press and hold the +/– ZOOM keys. See Views: Viewing Cartography
for more information.
NOTE: The Auto Range setting does not apply to the Bird's Eye View.
NOTE: If Auto Range is turned on, it will override the Auto Zoom menu action.
Vessel Offset allows you to display more of the Chart View based on the speed of the boat. Vessel
Offset works with Offset Speed.
Turn on Vessel Offset, and set the speed threshold in Offset Speed. When the boat is moving
below the Offset Speed setting, the boat icon will be displayed in the center of the Chart View.
When the boat is moving at or above the Offset Speed setting, the boat icon will move to the edge
of the view so that more of the Chart View is shown on-screen.
Offset Speed allows you to see more of the Chart View when the boat is traveling at or above the
Offset Speed setting. Vessel Offset must be turned on. See Vessel Offset for more information.
Contour Lines sets whether the water contour lines are visible or hidden in the Chart Views. Contour
Lines are also affected by the Water Level Offset setting.
Chart Menu Tab
Auto Range
(Advanced)
Settings: On, Off; Default = Off
Vessel Offset
(Advanced)
Settings: On, Off; Default = Off
Offset Speed
(with Vessel Offset turned on)
Settings: 5 to 60 mph, 5 to 50 kts, or 8 to 95 kph (International Models
only); Default = 5 mph, 5 kts, 8 kph
Contour Lines
(optional-purchase LakeMaster charts only)
Settings: Hidden, Visible; Default = Visible
142