Daylight Saving Time (Advanced); Position Format (Advanced); Time Format (Advanced, International Models Only); Date Format (Advanced, International Models Only) - Humminbird HELIX 5 SI GPS Operation Manual

Daylight Saving Time adjusts the time display to account for local Daylight Saving Time when
Time+Date is selected as a Digital Readout (see Setup Menu Tab: Select Readouts).
Selecting On adds one hour to the time display adjusted for your local time zone. Selecting Off
leaves the time display as adjusted for your local time zone.
Position Format selects the format of the latitude and longitude position display.
Time Format changes the time format used by the unit. Time Format selects a 12 hour or 24 hour
format for the time of day displayed when Time + Date is selected as a Digital Readout (see
Setup Menu Tab: Select Readouts).
Date Format changes the date format used by the unit. Date Format selects the format for the
date display when Time + Date is selected as a Digital Readout (see Setup Menu Tab: Select
Readouts).
Digits Format adds a tenth decimal place to the readouts such as Temperature and Depth. Use
the settings to change the display of the decimal place or remove it from the digital readouts.
Examples of the different settings are displayed below. Also, see Select Readouts and Views.
Setup Menu Tab
Daylight Saving Time
(Advanced)
Settings: Off, On; Default = Off
Position Format
(Advanced)
Settings: dd.ddddd°, dd°mm.mmm', or dd°mm'ss"; Default = dd°mm.mmm'
Time Format
(Advanced, International Models only)
Settings: 12-hour, 24-hour; Default = 12-hour
Date Format
(Advanced, International Models only)
Settings: mm/dd/yy, dd.mm.yy, yy.mm.dd; Default = mm/dd/yy
Digits Format
(Advanced)
Settings: Small tenths, Large tenths, No tenths; Default = Large tenths
Small tenths Large tenths
150
No tenths