Table of Contents
Advertisement
Field Service Ver. 1.0 Jun. 2008
3.3.4
Auto document feeder tray
1. Open the auto document feeder unit.
[1]
[1]
[1]
[4]
Y109850-7
[2]
[1]
A0EYF2C503DA
[2]
A0EYF2C506DA
[2]
[3]
A0EYF2C010DA
Service Manual
2. Remove six screws [1], and remove
the rear cover [2] of the main body.
3. Remove the screw [1], and remove
the cover [2].
4. Remove the screw [1], and remove
the ground terminal [2].
5. Disconnect the connector [3].
NOTE
• When disconnecting the connector
[3], use care not to allow the flat
cable [4] to be disconnected and,
after the connector [3] has been
disconnected, make sure that the
flat cable [4] is not disconnected.
3. Other
15
Advertisement
Table of Contents
