Configuring Basic Settings - HP HSR6800 Installation Manual

Step
3. Set the authentication mode.
4. Set the user privilege level.
2. Plug the D-9 female connector to the serial port of the configuration terminal or PC.
3. Connect the RJ-45 connector to the AUX port of the router. Then you can log in to the router through
the AUX port.
For more information about how to log in to the router through an AUX port, see HP HSR6800 Routers
Fundamentals Configuration Guides.

Configuring basic settings

Step
1. Set the current time and date.
2. Enter system view.
3. Enter Ethernet interface view.
4. Specify an IP address for the
interface.
5. Return to system view.
6. Specify a static route.
7. Save the current configuration
to the startup configuration file
in the root directory of the
storage media.
8. Verify the running
configuration.
Command
authentication-mode none
user privilege level 3
Command
clock datetime time date
system-view
interface interface-type
interface-number
ip address ip-address { mask-length
| mask } [ sub ]
quit
ip route-static dest-address { mask |
mask-length } { next-hop-address |
interface-type interface-number
[ next-hop-address ] | vpn-instance
d-vpn-instance-name
next-hop-address } track
track-entry-number [ preference
preference-value ] [ tag tag-value ]
[ description description-text ]
save [ safely ] [ backup | main ]
[ force ]
display current-configuration
45
Remarks
Optional.
Available in user view.
Available in user view.
N/A
By default, no IP address is
assigned to any interface.
Available in any view.
By default, the preference of a
static route is 60, tag is 0, and no
description is configured.
Available in any view.
Available in any view.