Lightning Protection; Space; Power Supply; Installation Accessories - HP HSR6800 Installation Manual

Lightning protection

To protect the router from lightning better, do as follows:
• Make sure the grounding cable of the chassis is well grounded. For how to connect the grounding
cable, see
Make sure the grounding terminal of the AC power receptacle is well grounded.
•
Install a lightning arrester at the input end of the power supply to enhance the lightning protection
•
capability of the power supply.
Install a special lightning arrester at the input end of outdoor signal lines (for example, E1 line) to
•
which interface modules of the router are connected to enhance the lightning protection capability.

Space

Because the router is heavy, install the router to the rack with the rack shelf.
•
• For ease of installation and maintenance, reserve at least 1 m (3.28 ft) of clearance between the
rack and walls or other devices.
For heat dissipation, make sure the headroom in the equipment room is no less than 3 m (9.84 ft),
•
and an appropriately sized air conditioner is provided.

Power supply

Make sure the power supply system at the installation site is stable and meets the requirements of
•
the power modules, including the rated input voltage.
Select power modules based on the power consumption of the cards and fan trays. For more
•
information about system power consumption and technical specifications of power modules, see
"Power

Installation accessories

Console cable
(supplied with the
router)
"Grounding the router."
consumption," and "Power
Grounding cable
(supplied with the
router)
module."
ESD wrist strap
(supplied with the
router)
8
Mounting bracket
Mounting bracket
and cable
management bracket
for the HSR6802
(supplied with the
(supplied with the
router)
and cable
management
bracket for the
HSR6804
router)