Customizing The Settings With The Sub Control Panel - ELNA eXpressive 970 Instruction Manual

q
02 10
03
w
1
Customizing the Settings with the Sub Control
Panel
Press the MODE button until the LCD screen shows SET
blinking.
Press the ENTER button to start the My setting mode.
q MODE button
w ENTER button
* Press the upward or downward arrow button
to go to the next or previous setting.
NOTE:
The value shown in the illustration is the default (preset)
value of each setting.
[01] Buzzer sound control
Press the right or left arrow button
loudness of the buzzer.
The loudness of the buzzer can be set from 0 to 10.
To mute the buzzer, set the value to [ 0].
Press the ENTER button to register the new setting.
[02] Eco mode setting
The sewing lights will turn off, and the LCD screen
go dark if you have not used the machine for a while.
Pressing any button will turn on the sewing lights and
screen.
The eco mode timer can be set from 1 to 30 minutes by
pressing the right or left arrow button
Press the ENTER button to register the new setting.
[03] Machine ID number
When connecting two or three units of the machine to the
PC at the same time, you need to assign the identification
number to each machine.
Press the right or left arrow button
select the ID number.
Press the ENTER button to register the new setting.
62
to adjust
.
to