ELNA eXpressive 970 Instruction Manual page 76

Grid Size
Maximum speed setting
Hoop for Monogramming
1.2
Grid Size
Maximum speed setting
Hoop for Monogramming
1.2
Grid Size
Maximum speed setting
Hoop for Monogramming
1.2
Grid Size
Maximum speed setting
Hoop for Monogramming
1.2
e
11. Grid size
q
The grid size of the editing screen can be changed by
pressing the function key next to "+" or "–".
You can select one of 3 sizes, 10 mm, 20 mm and
30 mm.
To hide the grid, select "OFF".
q Function keys (+, –)
Press the OK key.
w OK key
w
12. Maximum sewing speed
q
The maximum speed of embroidery can be changed from
400 to 800 spm by 100 spm intervals.
Press the function key next to "+" or "–" to select the
desired speed.
q Function keys (+, –)
Press the OK key.
w OK key
w
13. Hoop selection for monogramming
q
Press the function key next to "+" or "–" to select the
default hoop for monogramming from the following.
M1 to M3
T1 to T6
S1, S2, H1
J1 to J8
Refer to page 49.
q Function keys (+, –)
Press the OK key.
w OK key
w
14. Thread trimming position
q
If threads are not trimmed properly, adjust the needle
drop position where the threads being trimmed.
Press the function key next to "+" or "–" to set a distance
between the thread trimming position and the last stitch
of the pattern section or select [OFF] to turn off the
function.
q Function keys (+, –)
The adjustable range is from 0.5 to 1.5.
Press the OK key to register the new setting.
w OK key
w
To go to the next page, press the next page key.
e Next page key
72