Table of Contents
Advertisement
04
NO
05
NO
06
600
07
4
[04] Formatting the memory
If the internal memory does not function due to damage
to the memory bank, you need to re-enable it by
formatting the memory.
NOTE:
If you format all the data stored in the memory will be
erased and cannot be restored.
Press the right arrow button
Press the ENTER button to format the memory.
If you do not wish to format, press the left arrow button
to change the indication to [NO].
Press the ENTER button to register the new setting.
[05] Resetting all to defaults
All the parameters in the My setting mode can be reset to
the original values (factory setting).
Press the right arrow
Press the ENTER button to reset the settings to defaults.
If you do not wish to reset, press the left arrow button
to change the indication to [NO].
Press the ENTER button to register the new setting.
[06] Maximum sewing speed
The maximum sewing speed can be set from 400 to 800
spm by 100 spm increments.
Press the right or left arrow button
sewing speed.
Press the ENTER button to register the new setting.
[07] Thread selection
There are 8 kinds of thread to choose from.
Press the right or left arrow button
brand number. The color code of the selected brand will
be shown in the Ready to Sew mode display.
The brand numbers are as follows:
1 Janome
2 Gütermann SULKY (Rayon 40)
3 Madeira (Polyester 40)
4 Madeira (Rayon 40)
5 Robison-Anton (Polyester 40)
6 Robison-Anton (Rayon 40)
7 Mettler (Poly Sheen)
8 Pearl Yocht (Rayon)
Press the ENTER button to register the new setting.
63
to indicate [YES].
button to indicate [YES].
to alter the
to select the
Hide quick links:
Advertisement
Table of Contents
