Bulb Specifications - Volvo S90 Owner's Manual

MAINTENANCE AND SERVICE
||
•
The pin in the clip needs to be pressed
back fully before the clip is refitted in the
plastic cover.
•
When the plastic cover is refitted, the pin
must be pressed in until its end surface is
level with the surface of the clip.
Related information
•
Bulb replacement (p. 514)
•
Bulb specifications (p. 520)
An authorised Volvo workshop is recommended.
13
520

Bulb specifications

The specifications apply to bulbs in the halogen
headlamps as well as the rear fog lamp bulb.
13
Contact a workshop if faults occur in other
lamps.
Function
W
Dipped beam 55
Main beam 65
Front direction indicators 24
daytime running lights/ 21/5
position lamps, front
Rear fog lamp 21
A Watt
Related information
•
Bulb replacement (p. 514)
Wiper blades in service position
The windscreen wiper blades must be in service
position when, for example, they are to be
replaced.
A Type
H7
H9
PY24W
W21/5W
H21W LL
Wiper blades in service position.
In order to change, clean or lift the wiper blades
(e.g. for scraping off ice from the windscreen)
they must be in service position.
IMPORTANT
Before placing the wiper blades in the service
position, make sure that they are not frozen
down.