Changing The Tolerance For The Automatic Speed Limiter - Volvo S90 Owner's Manual

DRIVER SUPPORT
||
Deactivating the automatic speed
limiter
– Tap on the Speed Sign Assist
function view.
> ASL is deactivated and the button's indi-
cation becomes GREY - SL is activated
instead.
WARNING
After switching from ASL to SL the car will no
longer follow the signed speed limit but only
the maximum speed stored in memory.
Related information
•
Automatic speed limiter* (p. 268)
•
Changing the tolerance for the Automatic
speed limiter (p. 270)
270
Changing the tolerance for the
Automatic speed limiter
button in
The speed limiter function (Automatic Speed
Limiter - ASL) can be set for different tolerance
levels.
It is possible to increase/decrease the signed
speed limit. If, for example, the car follows a
signed speed limit of 75 km/h (45 mph) the
driver can instead choose to allow the car to
maintain 80 km/h (50 mph).
Buttons and symbols for functions.
–
Press the steering wheel button
until 75 km/h (45 mph) in the centre of the
speedometer (4) changes to 80 km/h
(50 mph).
> After which, the car uses the selected tol-
erance 5 km/h (5 mph) as long as signs
passed are showing 75 km/h (45 mph).
The tolerance is followed until a road sign
with a lower or higher speed is passed -
then the car follows the new signed
speed limit instead and the tolerance is
deleted from the memory.
If the Road Sign Information* function is
activated, the signed speed limit will then
be shown with a RED indicator on the
speedometer.
* Option/accessory, for more information, see Introduction.
(1)